Hi. We have Mikrotik devices and Zyxel switches on access level (GS1200-8) Switches receives address by DHCP from Mikrotik main router. Sometimes some switches (not all) can’t renew address from DHCP and have status waiting In mikrotik log we have next messages: "lease waiting, addressed to me, fix-selecting-init-reboot,…
This is one of the most common issues when deploying Nebula devices - the reason for this, in short terms, is that the devices by default try to resolve to either s.nebula.zyxel.com or d.nebula.zyxel.com. This bears two issues: A multiple times cascaded subdomain (e.g. this. that. andthis. alsothis. domain.com) can lead to issues for some DNS
Router Mode 4.1 Overview The EMG3425-Q10A is set to router mode by default. Routers are used to connect the local network to another network (for example, the Internet). In the figure below, the EMG3425-Q10A connects the local network (LAN1 ~ LAN4) to the Internet. Page 25 Click this button to refresh the status screen statistics. Click this
ISP: MetroNet. All devices (1 phone, 1 tablet, 2 desktops) were abruptly disconnected from the 2.4GHz network. The ssid was broadcast, but no devices could connect to it. Meanwhile, the 5GHz network had no connectivity issues and internet access was available during this time. 2.4GHz service was restored after 5-10 minutes.
To protect your Zyxel router from being accessed wirelessly by unauthorised users, you can change your wireless password. For a personal touch, you can also change your wireless name. Changing your Wi-Fi name and password. Connect a device to your Zyxel router using an Ethernet cable (recommended) or Wi-Fi.
Started it later (beeps 3 times during boot.. a lot of seconds between the beeps), still cant find it. Using the findme address and then push the sync button, nothing happens. In my app for my ASUS Router i can see the nas online, with an IP number, trying to use both the ipnumber and the given name to access it, nothing happens.
